Dust Collection Tapered Adapter 4" LH Thread
PN 13062

Tapered adapters are designed to CONNECT and DISCONNECT from your equipment quickly.

The threaded end of the adapter fits tightly into the dust collection hose eliminating the need for hose clamps. They are easy to thread into the hose if you wet the adapter with soapy water.

The inside of the opposite end of the adapter is tapered and fits perfectly onto the matching taper of the dust gates, universal hoods, jointer hoods, saw hoods and floor sweeps.

Left hand thread.

This 4” tapered adapter can be easily connected to the following fittings:

13031 Blast Gate 4” Tapered M/M
13040 Blast Gate 4” M/Threaded
13041 Blast Gate 4” Tapered M/F
13065 Blast Gate 4” Tapered M/M Clearing
13101 Dust Hood Table Saw 14”
13102 Hood 4” 8-1/4” x 8-1/4”
13103 Hood 4” 8” x10-1/4”
13104 Hood 4” - 6-1/4”
13111 Floor Sweep 4” - 24”
13403 Hood 4” - 4-1/2” x 9-1/2”
13405 Mountable Adapter 4”
13408 Hood 4” - 8” x 13-1/2”
and LH thread 4" Hose

You can check if your hose is a left or right hand spiral by looking at the end of the hose. If from the start, the hose wire turns clockwise (right) as it goes toward the other end of the hose, it’s a right hand spiral. If it turns counter clockwise (left) it is left handed.

Click here if you need a right hand threaded adapter.