|
Sorry, we're temporarily out of stock :-(
For more info - please give us a call, toll free, 1-800-387-5716.
|
Fully adjustable jaws and head position make this vice the absolute best choice for holding irregular shaped objects.
• large 13 3/4" x 5" main jaw
• small 2" x 2 1/8" secondary jaw
• handy 5 3/4" x 5" auxiliary jaw
• 12" maximum
opening
• 360o jaw
swivel
• 90o head
tilt
solid 54 lbs!
Scroll down to see Operation Details below.
Shipping Note:
Due to the heavier weight of this product, the regular shipping rates do not apply.
If you live in Canada, the shipping will likely be in the neighbourhood of $25 to $40.
If you live in the United States, we will need to get a quote for shipping (anywhere between $30 - $70) so we ask you please call us 1-800-387-5716. Also, Custom charges (approx $30 - $60) will apply and we will require your IRS# (Social Security Number) for Customs. When we asked why your IRS# is required for orders $200+, we were told "US Import Requirements - The US Customs Service does not require an importer to have license or permit. Customs entry forms do ask for your importer number, or if your business is not registered with the IRS or you do not have a business, your social security number."
Shipping charges will be added to your invoice when your order is processed.
If you have any questions or concerns, please give us a call 1-800-387-5716.
|
Vise Tilt
The Pattern Maker's Vise can be tilted from the normal position (perpendicular to the work
surface) through 90o until the jaws are parallel to the bench top. the
Vise can be locked in any position along the 90o travel.
1. Hold Vise firmly, and unlock Tilt Bar by disengaging Locking Cam Lever.
2. When Tilt Bar is unlocked swing Vise to desired position.
3. Engage Locking Cam lever firmly until Tilt Bar is securely locked. |
 |
Vise Rotation
The Vise rotates 360o around the Vise Hub and can be locked at any angle of
circular rotation.
1. Hold Vise, and disengage Rotation Locking Cam Lever.
2. Rotate Vise into position.
3. Firmly engage Locking Cam Lever until Vise is securely locked. |
 |
Front Jaw Pivot
To clamp tapered work pieces, the Front Jaw pivots 5o in either
direction. Or it can be positioned parallel to the Rear Vise Jaw for normal clamping
operation.
1. Open jaws and position stock in Vise.
2. Close jaws until they are close to, but not touching, the work
piece.
3. Pivot Front Jaw parallel to taper of work piece by moving Cam Arm up
or down.
4. Tighten jaws on work piece.
|
 |
Integral Clamping Dogs
Each jaw is equipped with two adjustable Clamping Dogs for clamping irregular shaped
pieces. The Dogs are equipped with Side Springs so they hold their position above
the jaw.
1. Push up on Round Dog Extension that protrudes under jaws.
2. Position work piece on top face of jaws.
3. Adjust height of Dogs so that the top of Dog is slightly below top
of work piece.
4. Tighten jaws.
|
 |
Auxiliary Swivel Jaw
An Auxiliary Internal Jaw is provided for clamping tapered pieces greater than 5o.
This jaw can be assembled and disassembled quickly for special purpose clamping.
1. Open Vise far enough to fit Swivel Jaw between main jaws.
2. Insert tongue of Swivel Jaw through rectangular hole in Rear Main
Jaw. Tapped hole in tongue should point away from main beam of Vise.
3. Locate the ridge of the Swivel jaw into the machined slot in the
Rear Main Jaw. Thread the Keeper Screw into the Swivel Jaw Tongue.
4. Be certain that the ridge remains in the slot during the clamping
operation. |
 |
Pattern
Maker's Vise Owner's Manual - Adobe
Acrobat™ required
Don't have a copy of Adobe Acrobat™?
Click
Here to download it for free!
|
