|
8 oz spray
Alan R. said "You saved my
table saw! It was heavily rusted and Rust Free™
took the rust right off. As soon as I put it on, I could see it working. I'd
like to order one for my friend Dave plus the T9™."
Rust Free TM is
designed to remove rust and
rust staining from tool
surfaces. You spray it on and
allow it to work for up to a
minute. Then using a non-
metallic brush or abrasive pad
that's not metallic, you gently
agitate the Rust Free
TM.
Keep doing this for a
maximum of 3 minutes from
the time you sprayed it onto
the metal. Wipe off with a
clean rag. You can do this
multiple times if necessary but
keep in mind to only do an
area as large as you can
handle in the 3 minute
period. If you allow it to dry
on the metal, you'll leave new
marks similar to water marks
and they can be difficult to
remove too.
Rust Free™ removes
rust and stains from any surface including cast iron and steel.
Spray on, wait 30 seconds and then rub lightly
with a non-metallic abrasive pad or brush. After 3 minutes wipe off. If rust
still remains repeat application. Areas which are deeply pitted should be worked
more.
Now that you've removed the rust, you need to
protect the bare metal - Protect
with T9™
Use on:
Steel
Cast Iron
Stainless
Fiberglass
Chrome
Tile
Porcelain
Vinyl
Cloth
Remove
resin, gum and pitch from saw blades, drill bits, tool top etc with Blade &
Bit - another great Boeshield product.
Read woodmagazine.com article.
|
