Most woodworking machines were never designed for clamping jigs, fixtures or feather boards onto them.

These high strength switchable magnetics have solved that problem.

Here's how they work... There's two internal magnets. One is stationary while the other can be rotated by the switching knob. With the poles of the two magnets opposing each other, the magnetic fields cancel and the MagJig appears to have no magnetic power. BUT, place the MagJig on a cast iron or steel surface and turn the switch aligning the poles and it's virtually impossible to move under normal application.

You can imagine how handy this can be! Now you are limited only by your imagination. The 20mm MagJig (rated at 95 pounds breakaway force) is perfect where lesser holding power is required. The 30mm MagJig (rated at 155 pounds breakaway force) takes on the bigger jobs. Plus - using 2 or 3 or more MagJigs doubles, triples or more the holding power on your jig. Watch the videos below for ideas where Mag Jigs can be used.

More versatile than clamps. Use MagJigs work anywhere on a steel table.

- simply twist knob on/off

- super strong magnetic grip

- moves easily from jig to jig

95 lbs of breakaway force! So fast and so easy!

To set up: Drill hole in 18mm board. Secure with screws if needed. MagJigs are easy to remove and use in multiple jigs.

Operation: A simple half-turn secures the MagJig to any ferrous table. Strong against shear. Leave MagJig off when done.

Click here for Operation and Instruction Manual Adobe Acrobat® required.

Don't have a copy of Adobe Acrobat™?
Click Here to download it for free!

MagJigs are available in pre-made tools too. Click here for our selection.